.D71 are extremely thin and lightweight. .7" 3RU Rack Monitors with dual 7” IPS 1280x800 screens, .viewing SD, HD and 3G-SDI video on 3RU rack monitor.
.With GPIO for Software control via Ethernet connection .
SEETEC Rack mount LCD monitor has been widely used in all levels of TV news production, post production, programme broadcasting and TV broadcasting trucks, special vehicles video surveillance and other fields. Since this series is working with other adjacent professional equipments, therefore, the high stability, high reliability and electromagnetic compatibility are very important conditions to make sure the whole system work smoothly.
D71 uses an IPS panel, which provides a wide 178°/178° viewing angle and brightness output of up to 400nit. This means you’ll be able to see accurate, consistent and bright images from any point of view.
Easy to operate, time-saving
Consistent design style, the same function and operation mode setting is one of the features of the products. Users only need to know one product operation mode , you can operate the full range products, time-saving and convenient.
SDI / HDMI / CVBS /Audio
Each LCD of D71 monitor supports:
3G/HD/SD-SDI input × 1
3G/HD/SD-SDI loop output × 1
HDMI input × 1
HDMI loop output × 1
CVBS input × 1
CVBS output × 1
Audio(L/R) input× 1
Speaker and Stereo Headphone output× 1
USB for Upgrade
D71 rack mount Monitor includes a LAN port,This allows the operator to Software control via Ethernet connection (software included).
The rear panel LAN 100 port connects the unit to the LAN. Once connected, the user simply locates the IP address of any one of the units connected to the LAN. This is accomplished by going to the MAIN MENU of any of the connected units and selecting the NETWORK CONFIGURATION submenu. This will then display the IP address of that unit.
Simply type this IP address into the address bar of your Software . It is possible to poll your LAN for all other units connected by accessing the NETWORK tab from the Top Menu.
The user can then control multiple networked D71 monitor at once using a single Software. The user may select which monitor(s) they wish to control and send commands to those particular monitors. The browser provides real-time status of any connected monitor, ensuring consistent signals / feeds and so forth.
Stablity and Reliability
As rack mount LCD monitors usually in a continuous working condition, all components including LCD panel must be accordance with industrial quality standard. Full Metal case not only makes the product more robust, and durable, but also is a good solution to the heat dissipation problem.
Peaking Focus Assist (Red highlight over parts of the monochrome image in focus)
Check Field (Red, Green, Blue, Mono)
Pixel to Pixel
Safe Marker (80%, 85%, 90%, 93%, 96%,2.35:1)
Image Flip (Horizontal, Vertical, Hor&Ver)
6. Monitoring via front panel 3.5mm stereo headphone jacks
7. Built-in LED tally indicators (Red, Green, Yellow)
8. Power using included 12-volt supply or use standard 4-pin
Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear.It’s shows Red highlight over parts of the monochrome image in focus.
Packaging & Shipping
Gift&neutral box 5 pcs/carton
Delivery Information: SEETEC strives to get all orders out as quickly as possible after QC Dept fully test them! Shipping Method: By Express: Fedex,DHL,EMS,TNT,UPS, By Logistics: by air&sea Shipping Time: From Monday to Saturday 8:00am-17:30pm Shipping Address: .If by paypal, Please note items will only be shipped to verified users with confirmed shipping addresses .If by T/T, shipping address as communicate
1.Powerfull Research&Development Experience
3.Strict QC TEST Control
4.EASY & FAST Communicate
5.Responsible After Service
SEETEC designs and manufactures small HD LCD monitors. Products cover on-camera LCD field monitor, VGA/HDMI/HD-SDI LCD monior, LCD touchscreen monitor,Industril PC etc.
Our products are finely engineered to ease of use, maximum portability, dependability and durability. We make products at the finest quality you can find in the video and photography field.
SEETEC R&D core team leaders are composed by a dozen senior technical engineers have years of experience. They ensure our products are innovative and consistently push the boundaries of both technology and design.
We listen to every customer, and take care of their feedback and advices. It is a good way to improve our products and service. Our mission is to develop creative products to customers with a good experience.
We have also several years experience in OEM & ODM orders, and we can meet a variety of customized requirements of customers worldwide. If you have any interest or advice, please feel free to contact us.